This bulletin provides information about the upgrade of the IEC application required for compatibility with the software changes on the RMC-100. Embedded software in both the RMC-100 and the XSeriesG5 devices support an IEC application incompatible with previous IEC applications.

This bulletin provides information to resolve watchdog resets observed on RMC-100 devices with flash 2105457-027 and OS 2105411-030 or earlier versions. For RMC-100 running at 300 MHz, please also see Technical bulletin 214 (2106369TB-TB214)

This bulletin provides instructions to apply a software patch to RMC-100 devices set with 300 MHZ CPU speed. Apply the software patch prior to upgrading the devices to customer package versions 2105452-030 or later or Flash versions 2105457-027 or later. Without the patch, upgrades to the versions above will cause OS/Flash incompatibility issues and cause service disruption.

This bulletin applies to WinCCU version 7.05.2. It provides information about the flash versions supported by version 7.05.2. No additional enhancements are planned for WinCCU and new features or enhancements in the embedded software (flashes) will not be reflected or supported by version 7.05.2.

This bulletin applies to the RMC-100. Using USB connection to RMCs with instantiated IEC applications can cause device reset. This bulletin provides workarounds to avoid reset.

An upgraded path to new digital technologies. This new generation of flow computers and RTUs offers a low-power, high-reliable microprocessor-based unit with a new Linux operating system, persistent memory, and new connectivity, combined with the same wide-range of measurement, monitoring, and alarm applications for remote oil and gas systems.

Devices with Flash numbers 2105298-006 or earlier (uFLO G5) and 2105457-019 or earlier ( RMC-100) AND with the Gas Coriolis Interface application enabled, experience errors in the hourly logs: all enabled measurement applications miss 1 second at the top of the hour.

Some users have reported that PCCU does not launch on a PC running Microsoft Windows ® 10. Reinstalling PCCU (versions prior to 7.52) does not resolve this issue.

This technical bulletin describes the procedure for upgrading the phase 0 API liquid tube application (selectable units) to phase 1 API liquid tube application (selectable units). This bulletin is only applicable to certain XSeries G4 devices.

Notification of manufacturing defect in a limited number of TFIO Communication and Combo IO/VC interface modules.

microFLO G4 and XFC G4 6200/6201EX SYSTEM RESET AND RTD INPUT PERFORMANCE DEVIATION

Notification regarding G4 32MB engine card modification and system resets

RTD MEASUREMENT PERFORMANCE SPECIFICATION DEVIATION

WINDOWS 7 PCCU INSTALLATION FOR ADDITONAL USERS

NGC MODBUS REGISTER ASSIGNMENTS

TCI TOOLKIT UPGRADE NOTICE

The following Technical Bulletin discusses changes that have been made (per GE/MDS Product Bulletin PB-0904) to cables connecting MDS 9810, 4310 and x710 family radios to Totalflow equipment. The following Totalflow cables have been obsoleted and replaced with: 2015026-005 replaced with 2103990-001 2015026-010 replaced with 2103990-002 2015026-004 replaced with 2103990-003 (This cable is a spare part only. It is no longer offered in Comm Kits.) Any User Drawings (UDs), Wiring Instructions (WIs) or drawings in users’ manuals should be updated if they make reference to the obsoleted cables.

GE MDS and ABB have been working together to determine the preferred software settings and hardware changes for improved system reliability and operations of the system.

TFIO Communication Interface Module (CIM) and Modbus Protocol