Totalflow Training for Flow Computers and RTU's, Gas Chromatographs, and Application Software

Totalflow Gas Chromatography (NGC, PGC1000)

Totalflow XSeries Well Production

Totalflow Flow Computer Measurement

Totalflow Host Communications (WinCCU)

Totalflow XSeries Automation

Totalflow Gas Chromatography (NGC, PGC1000)

The μFLO G5 (microFLO G5) is a direct replacement for the time proven μFLO/μFLO G4 flow computers.

This bulletin provides information about the upgrade of the IEC application required for compatibility with the software changes on the RMC-100. Embedded software in both the RMC-100 and the XSeriesG5 devices support an IEC application incompatible with previous IEC applications.

This bulletin provides information to resolve watchdog resets observed on RMC-100 devices with flash 2105457-027 and OS 2105411-030 or earlier versions. For RMC-100 running at 300 MHz, please also see Technical bulletin 214 (2106369TB-TB214)

This guide provides scenarios and instructions to configure XSeriesG4 devices for communication using the Modbus protocol.

This bulletin provides instructions to apply a software patch to RMC-100 devices set with 300 MHZ CPU speed. Apply the software patch prior to upgrading the devices to customer package versions 2105452-030 or later or Flash versions 2105457-027 or later. Without the patch, upgrades to the versions above will cause OS/Flash incompatibility issues and cause service disruption.

Release Notes for the uFLO G5 Embedded Software Customer Package 2105409. This package contains both OS (2105411-031) and Flash (2105298-015).

Release Notes for the RMC-100 Embedded Software Customer Package 2105452-026 (OS [P/N: 2105411-031 and Flash [P/N: 2105457-028)

RMC-100 standard customer package 2105452-031 (OS [P/N: 2105411-031] and Flash [P/N: 2105457-028])

uFLO G5 standard customer package (2105409-023). Contains both OS and FLASH. Supports both US and selectable units. For features and defect fixes review the uFLO G5 Embedded Software Customer PKG 2105409 Release Notes.

This bulletin applies to WinCCU version 7.05.2. It provides information about the flash versions supported by version 7.05.2. No additional enhancements are planned for WinCCU and new features or enhancements in the embedded software (flashes) will not be reflected or supported by version 7.05.2.

PCCU 7.66 Release Notes provide information on software updates, new features and fixed bugs. PCCU updates may reflect changes on the embedded software. When planning an upgrade review embedded and PCCU release notes.

Warning!!!!!! This PCCU 7.66 is intended to be used with PCCU 7x or newer software. Do not attempt to update an older version (PCCU 6.x or older) of PCCU. This version does not include EZ Blocks or WellTell software. These are available as separate downloads an installations. The .exe will extract the contents to temporary directory c:\temp\pccu32 766 and then run setup.exe to install PCCU 7.66, and remove the temp files when completed.

Release Notes for the XSeriesG5 Embedded Software Customer Packages 2105808-003 (XFCG5) and 2105880-003 (XRCG5). These packages contain the common OS (2105897-006) and the flashes: 2105805-006 (for the XFCG5) and 2105864-006 (for the XRCG5) respectively.

XRC G5 standard customer package (2105880-003). Contains both OS and FLASH. Supports both US and selectable units. For features and defect fixes review the XSeriesG5 Embedded Software Customer PKG 2105808/2105880 Release Notes.

XFC G5 standard customer package (2105808-003). Contains both OS and FLASH. Supports both US and selectable units. For features and defect fixes review the XSeriesG5 Embedded Software Customer PKG 2105808/2105880 Release Notes.

The Bartlesville location manufactures flow computers, gas chromatographs, and tank level devices for installation on pipelines and wellheads in the oil and gas industry.

Flash (2104158-048 XFC G4 EX Selectable Units Flash Package for G4 6200EX

XFC G4 6200/6201EX standard FLASH package (2104159-048)

uFLO G4 Selectable Units FLASH package (2104498-034

uFLO G4 standard FLASH package (2104497-034)

XFC G4 Selectable Units FLASH. This FLASH is applicable only for 32M FLASH systems. NOT TO BE USED ON 16M FLASH SYSTEMS.

XFC G4 standard FLASH. This FLASH is applicable only for 32M FLASH systems. NOT TO BE USED ON 16M FLASH SYSTEMS.

Release Notes for the G4 embedded software (FLASH). Document provides update information for all flashes for the following G4 devices: XFC, XRC, ExXFC, uFLO

XRC G4 Selectable Units FLASH. This FLASH is applicable only for 32M FLASH systems. NOT TO BE USED ON 16M FLASH SYSTEMS. See Release Notes.

XRC G4 standard FLASH. This FLASH is applicable only for 32M FLASH systems. NOT TO BE USED ON 16M FLASH SYSTEMS. See Release Notes.

This bulletin applies to the RMC-100. Using USB connection to RMCs with instantiated IEC applications can cause device reset. This bulletin provides workarounds to avoid reset.

The Totalflow EFM Tool reads gas measurement data from supported multi-vendor flow computers into an archive file (Archive) for display, reporting, and archiving.  All data handling and storage is built on time tested and proven WinCCU Technology.  From there, it can be exported into the EFM Tool Long Term Database (LTDB) or to formats suitable for importing into Accounting Systems, Production Databases, or Mainframe applications.

Total Measurement and Automation Systems

Plunger Analysis Software

Totalflow applications use several databases and file formats for storing data and configuration information. These include Microsoft SQL Server, Microsoft Access, and a binary file format for Gas Flow data.

The Totalflow Archive files (Archive) and Long Term Database (LTDB) provide a continuation of the EFM Audit Trail that begins in the Totalflow flow computers.  The Totalflow Universal Import format (an XML based format) provides a means of importing data from other EFMs, RTUs, or Circular Charts into the Archive.

The Totalflow Voice Alarm System (VAS) is a Microsoft Windows based program designed to call specified meter technicians, producers, etc., in the event of an alarm condition detected on any Totalflow FCU, RTU or AIU. A person with a valid access code can call into the system and request the current information from any Totalflow FCU or RTU assigned to his or her access code. With the appropriate rights, the caller can send commands to the device directly from the phone.

WebCCU is a software package that acquires data from WinCCU databases and displays it in a web browser to authorized users. WebCCU provides data across a corporate network to users within an organization or, if desired, the information can be provided over the Internet. Information can come from the long-term database, from current information, or from trend files stored at the RTU or Flow Computer.

Displays data acquired from field devices in a web browser to authorized persons with access to the Corporate Network or the Internet, depending on configuration.

The WinCCU Software provides Remote Communication, Remote Configuration and Data Management including a Bullet Proof Audit Trail for Totalflow Systems.

Brochure for software products.

An upgraded path to new digital technologies. This new generation of flow computers and RTUs offers a low-power, high-reliable microprocessor-based unit with a new Linux operating system, persistent memory, and new connectivity, combined with the same wide-range of measurement, monitoring, and alarm applications for remote oil and gas systems.

An upgraded path to new digital technologies. This new generation of flow computers and RTUs offers a low-power, high-reliable microprocessor-based unit with a new Linux operating system, persistent memory, and new connectivity, combined with the same wide-range of measurement, monitoring, and alarm applications for remote oil and gas systems.

This new generation will offer low-power, high-reliable microprocessor-based units with a new Linux operating system, persistent memory, and connectivity, combined with the same wide range of measurement, monitoring, and alarm applications for remote gas or oil systems. It will also provide an upgrade path to new digital technologies, protocols such as MQTT, and secured wireless connectivity (WiFi-Access Point or Bluetooth).

This new generation will offer low-power, high-reliable microprocessor-based units with a new Linux operating system, persistent memory, and connectivity, combined with the same wide range of measurement, monitoring, and alarm applications for remote gas or oil systems. It will also provide an upgrade path to new digital technologies, protocols such as MQTT, and secured wireless connectivity (WiFi-Access Point or Bluetooth).

Description of Ethernet port features available from PCCU, for RMC/XSeriesG5/UFloG5: Bandwidth Setting, Data Rate Limiting, Usage Statistics