This file includes release notes and memory card firmware update files V2.2.0 of AC500-S Safety PLC system for SM560-S (-XC), SM560-S-FD-1 (-XC) and SM560-S-FD-4 (-XC) safety CPUs, including firmware update files V2.1.0, V2.0.0 for all AC500-S safety CPUs and firmware update files V1.0.0 for SM560-S (-XC) safety CPUs.

Firmware update: V3.4.1 HF5 for AC500 V3

Firmware update: V3.4.1 HF1 for AC500 V3

Firmware update files (memory card image) V2.8.6 for all AC500 V2 CPUs

Firmware 1.2.1.20 for Ethernet master couplers The firmware version is capable to run on the following hardware variants: • CM597-ETHCAT 1SAP173700R0001 • CM597-ETHCAT 1SAP373700R0001 • PM595 internal couplers 1SAP155500R0279 • PM595 internal couplers 1SAP351500R0279 Changes in this version • Corrected setting of Link mode (Full Duplex) via IP Config Tool • Corrected display of Link mode (Full Duplex) via PLC Browser command “Coupler settings”. Installation (Download) To download this firmware to a CM597-ETH an AC500 CPU with firmware V2.4.0 or higher is needed. To download this firmware to a PM595 internal coupler the PLC firmware must be at least V2.6.0 The installation / download of this firmware should be performed via an SD-Card. • Attached are two SD Card images: o SD Card image to update up to 4 external coupler CM597-ETH to firmware version V1.2.1.20  SD-Card_create_CM597-ETH_V1_2_1_20.exe o SD Card image to update both internal coupler of PM595 to firmware version V1.2.1.20  SD-Card_create_PM595-ETH_V1_2_1_20.exe

Firmware update files (memory card image) V2.8.4 for all AC500 V2 CPUs

Firmware update files (memory card image) V1.2.18.21 for AC500 communication module CM597, CM597-XC

Firmware version 2.8.9.21 for PROFINET IO controller communication module CM579-PNIO (-XC) and PM595-4ETH (-XC) internal communication module. For more details, refer to the information provided in the documentation as part of the .zip file.

Firmware updates files - Allows Update of CM598-CN communication module. Contains the needed files for Update of FW for listed communication modules. Self-extracting file for SD-Card structure generation and file copying.

Firmware 4.4.1.20 for EtherCAT master couplers The firmware version is capable to run on the following hardware variants: • CM579-ETHCAT 1SAP170902R0001 • CM579-ETHCAT 1SAP170902R0101 • PM595 internal couplers 1SAP155500R0279 • PM595 internal couplers 1SAP351500R0279 To download this firmware to a CM579-ETHCAT an AC500 CPU with firmware V2.4.0 or higher is needed. To download this firmware to a PM595 internal coupler the PLC firmware must be at least V2.5.0 The installation / download of this firmware should be performed via an SD-Card. • Attached are two SD Card images: o SD Card image to update up to 4 external coupler CM579-PNIO to firmware version V2.8.4.20 o SD Card image to update both internal coupler of PM595 to firmware version V2.8.4.20 Firmware updates files. Contains the needed files for Update of FW/Boot-code/ for listed communication modules. Self-extracting file for SD-Card structure generation and file copying.

Firmware 1.6.2.20 for PROFINET IO Device coupler The firmware version is capable to run on the following hardware variants: CM589-PNIO 1SAP172900R0011, CM589-PNIO-XC 1SAP372900R0011, CM589-PNIO-4 1SAP172900R0111, CM589-PNIO-4-XC 1SAP372900R0111 Changes in this version: Update to Hilscher GmbH protocol stack revision 3.11.0.0 and PROFINET certification Known issues: N.A. Installation (Download) prerequisite To download this firmware to CM589-PNIO and -4, an AC500 CPU with firmware V2.4.0 or higher is needed. Firmware updates files. Contains the needed files for Update of FW/Boot-code/ for listed communication modules. Self-extracting file for SD-Card structure generation and file copying.

For PM595-4ETH from CPU V2.4.x, update to new CPU FW, new PROFINET IO FW and EtherCAT FW

Firmware update files (memory card image) V2.8.5 for AC500 CPU V2 PM572, PM573-ETH, PM582 and PM583-ETH (also for XC products)

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.7.2 (for all AC500 V2 CPU and AC500-eCo CPU with or without Ethernet - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 - PM566 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - Allows Update of CPU to latest - CPU boot codes V1.3.0 and V2.0.2 - CPU FW V2.2.0 - OnboardIO FW V1.1.4 - RTC FW V1.6 Contains the needed files for Update of FW/Boot-code for the following CPU: - PM554 may be followed by -R, -T-, -AC - PM554-ETH may be followed by -R, -T-, -AC - PM564 may be followed by -R, -T-, -AC - PM564-ETH may be followed by -R, -T-, -AC Self-extracting file for SD-Card structure generation.

Firmware updates files - to be mandatory used with AC500-S safety controller and IOs - allows update of CPU to latest: - CPU Bootcode V2.0.2 and V2.0.6 - CPU FW V2.2.1, - Display FW V2.5 Contains the needed files for update of FW/boot-code for the following CPUwith FW (from V2.0.x:), Rubric R0271 - PM572 - PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for memory card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.7.0 (for all AC500 V2 CPU except AC500-eCo CPU), V2.5.1 for eCo CPUs without Ethernet and V2.5.4 for AC500-eCo CPU with Ethernet - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 - PM566 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - allows update of CPU to latest FW V2.1.3 Contains the needed files for Update of FW/Boot-code for the following CPUwith FW (from V2.0.x:). Only valid for following CPU without Onboard Ethernet: PM554 WITHOUT Ethernet may be followed by -R, -T-, -AC PM564 WITHOUT Ethernet may be followed by -R, -T-, -AC PM572 PM582 Self-extracting file for memory card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.6.2 (for all AC500 V2 CPU except AC500-eCo CPU), V2.5.1 for eCo CPUs without Ethernet and V2.5.4 for AC500-eCo CPU with Ethernet - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 - PM566 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.5.1 (all), - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.1.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.4.4 (all), - Display FW V2.8 (AC500) - Onboard IO FW V1.1.4 (AC500-eCo) - RTC FW V1.6 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: - PM572- PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.1.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.4.2 (all), - Display FW V2.8 (AC500) - Onboard IO FW V1.1.4 (AC500-eCo) - RTC FW V1.6 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: - PM572- PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.0.1 - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0 - CPU FW V2.3.3 (all), - Display FW V2.5 (AC500) - Onboard IO FW V1.1.4 (AC500-eCo) - RTC FW V1.6 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo - PM554 - PM556 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: - PM572- PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.5.3 (all except eCo CPU), V2.5.1 for eCo CPUs - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 - PM566 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - allows update of CM579-ETHCAT communication module. Contains the needed files for update of FW/Boot-code/ for listed communication modules. Self-extracting file for memory card structure generation and file copying.

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.5.2 (all except eCo CPU), V2.5.1 for eCo CPUs - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - To be mandatory used with AC500-S safety controller and IOs- To be used with new SW Automation Builder V1.0.1- Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 AC500 CPU Bootcode V2.3.2 - CPU FW V2.3.2 (all), - Display FW V2.5 (AC500) - Onboard IO FW V1.1.4 (AC500-eCo) - RTC FW V1.6 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo - PM554 - PM556 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: - PM572 - PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - Allows Update of CM579-ETHCAT communication module. Contains the needed files for Update of FW/Boot-code/ for listed communication modules. Self-extracting file for SD-Card structure generation and file copying.

Firmware updates files - To be used with new version of Automation Builder V1.2.x - Include release notes with detailled improvments. Allows Update of CPU to latest: - AC500-eCo CPU Bootcode V1.3.0 and V2.0.2 - AC500 CPU Bootcode V2.3.0, V2.3.1 and V2.4.1 - CPU FW V2.5.4 (for all CPU except AC500-eCo CPU without Ethernet), V2.5.1 for eCo CPUs without Ethernet - Display FW V2.9 (AC500) - Onboard IO FW V1.1.6 (AC500-eCo) - RTC FW V1.7 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo: PM554 - PM556 - PM564 - PM566 may be followed by -T, -R, -P, -AC, -ETH AC500: PM572, PM573-ETH, PM582, PM583-ETH, PM585-ETH, PM590-ETH, PM591-ETH, PM591-2ETH, PM592-ETH, PM595-4ETH-F Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - allows update of CM574 together with a CPU to latest FW V2.1.3. Contains the needed files for update of FW/Boot-code/ for listed communication modules. Self-extracting file for memory card structure generation and file copying.

Firmware updates files - To be used with with Control Builder Plus from V2.0.0 Allows update of communication modules: FW V01.100 for CM577-ETH (1SAP170700R0001) FW V2.3.703 for CM579-ETHCAT (1SAP170901R0001) or integrated ethernet coupler from CPU (R0170 or R0270) with FW V01.100: PM571-ETH, PM581-ETH, PM582-ETH, PM590-ETH PM591-ETH Contains the needed files for Update of FW/Boot-code/ for listed Communication modules. Self-extracting file for memory card structure generation and file copying.

Firmware updates files - Allows Update of CM574 together with a CPU to latest FW V2.4.2 and RCOM FW V7. Contains the needed files for Update of FW/Boot-code/ for listed Communication modules. Self-extracting file for SD-Card structure generation and file copying.

Firmware updates files - Allows update of CM574 together with a CPU to latest FW V2.3.0 and RCOM FW V7. Contains the needed files for Update of FW/Boot-code/ for listed Communication modules. Self-extracting file for SD-Card structure generation and file copying.

Firmware updates files - Allows Update of CPU to latest: - CPU Bootcode V1.3.0 (eCo), V2.0.2 and V2.0.6 - CPU FW V2.1.9, - Display FW V2.5 - ONB IO FW V1.1.4 (eCo) - RTC FW V1.6 (eCo) Contains the needed files for Update of FW/Boot-code/ONB IO or RTC for the following CPU with FW (from V2.0.x:), AC500-eCo - PM554 - PM564 - PM554-ETH - PM564-ETH AC500: - PM572 - PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - Allows Update of CM574 together with a CPU to latest FW V2.2.0 and RCOM FW V7. Contains the needed files for Update of FW/Boot-code/ for listed Communication modules. Self-extracting file for SD-Card structure generation and file copying.

Firmware updates files - allows update of following communication modules: - CM572-DP - FW Version V01.097 - (1SAP170200R0001 / 1SAP370200R0001) - CM575-DN - FW Version V01.109 - (1SAP170500R0001) - CM578-CN - FW Version V01.101 - (1SAP170800R0001 / 1SAP370800R0001) Contains the needed files for Update of FW/boot-code for listed Communication modules. Self-extracting file for memory card structure generation and file copying.

Firmware updates files - allows update of CPU to latest FW V2.1.5 Contains the needed files for update of FW/Boot-code for the following CPU with FW (from V2.0.x:), Rubric R0271 PM554-ETH may be followed by -R, -T-, -AC PM564-ETH may be followed by -R, -T-, -AC PM573-ETH PM583-ETH, PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for memory card structure generation.

Firmware updates files - allows update of CPU to latest: - CPU Bootcode V2.0.2 and V2.0.6 - CPU FW V2.2.0, - Display FW V2.5 Contains the needed files for update of FW/Boot-code for the following CPUwith FW (from V2.0.x:), Rubric R0271 - PM572 - PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for memory card structure generation.

Firmware updates files - To be mandatory used with AC500-S safety controller and IOs - Allows Update of CPU to latest: - CPU Bootcode V2.0.2 (eCo) and V2.3.0 (AC500) - CPU FW V2.3.0 (all), - Display FW V2.5 (AC500) - Onboard IO FW V1.1.4 (AC500-eCo) - RTC FW V1.6 (AC500-eCo) Contains the needed files for Update of FW/Boot-code/Display/Onboard-IO/RTC for the following CPUwith FW (from V2.0.x:), by AC500-eCo - PM554 - PM564 may be followed by -T, -R, -P, -AC, -ETH AC500: - PM572 - PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.

Firmware updates files - Allows Update of CPU to latest: - CPU Bootcode V1.3.0 (eCo), V2.0.2 and V2.0.6 - CPU FW V2.2.4, - Display FW V2.5 - ONB IO V1.1.4 (eCo) - RTC V1.6 (eCo) Contains the needed files for Update of FW/Boot-code/ONB IO or RTC for the following CPU with FW (from V2.0.x:), AC500-eCo - PM554 - PM564 - PM554-ETH - PM564-ETH AC500: - PM572 - PM573-ETH - PM582 - PM583-ETH, - PM590-ETH, PM591-ETH, PM592-ETH Products may be followed by -XC for extreme condition devices. Self-extracting file for SD-Card structure generation.