Water utilities require reliable solutions securing the flow of water and wastewater. The ACQ580 drive for water is part of ABB’s all-compatible drives portfolio. This robust drive is designed to secure optimal operation of water and wastewater pumps, while ensuring low energy consumption. Intended for the United States

Designed for extreme locations, the Type 4X / IP66 580 series drive can withstand unfriendly environments with ease. The drive is resistant to various weather conditions from the snows of winter to the heat of summer. Indoors, it is resistant to water spray, dirt and chemicals and is NSF/ANSI 169 certified for food splash zones.

Recommended annual preventive maintenance actions

ACx580-01 R4 UL and cUL CoC

CSA CoC for ACx580-01 frame R4

ACH580, ACS580, ACQ580, ACS880 OSHPD certification. Intended for the US.

DoC for ACS580, ACH580 and ACQ580

The drive types listed within are deemed “Manufactured in the U.S. “, since the cost of the components manufactured in the U.S. is greater than 55% of the total as applicable, under Infrastructure Investment and Jobs Act (“IIJA”), Pub. L. No. 117-58, which includes the Build America, Buy America Act (BABA).

ACS580, ACH580 and ACQ580 drive module frames R3 and R5 to R9 for cabinet installation (options +P940 and +P944) supplement

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Start-up, control with I/O and ID Run, Control panel, Default configuration, Program features, Parameters, Fault tracing, Control through the embedded fieldbus interface, Control through a fieldbus adapter, Control chain diagrams, User's manual, User manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

ntroduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Start-up, control with I/O and ID Run, Control panel, Default configuration, Program features, Parameters, Fault tracing, Control through the embedded fieldbus interface, Control through a fieldbus adapter, Control chain diagrams, User's manual, User manual.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual

EU Declaration of Conformity summary document (Single DoC) for fieldbus options. EMC Directive 2014/30/EU and RoHS Directive 2011/65/EU. FBIP-21, FCAN-01, FCNA-01, FDNA-01, FECA-01, FEIP-21, FENA-21, FEPL-02, FLON-01, FMBT-21, FPBA-01, FPNO-21 and FSCA-01.

Declaration of Conformity, fieldbus options. Product are in conformity with the relevant requirements of UK legislation. Electromagnetic Compatibility Regulations, UK EMC, 2016. The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations, UK RoHS, 2012. FBIP-21, FCAN-01, FCNA-01, FDNA-01, FECA-01, FEIP-21, FENA-21, FEPL-02, FLON-01, FMBT-21, FPBA-01, FPNO-21 and FSCA-01.

Introduction to the manual; Start-up, control with I/O and ID run; Control panel; Default I/O configuration, Program features, Fault tracing, Fieldbus control through the embedded fieldbus interface (EFB); Fieldbus control through a fieldbus adapter; Control chain diagrams; Parameters; Further information; User's manual, User manual, Firmware manual, ACQ580 firmware manual. Firmware ordered with code +N845 (v2.01.100.12) is compatible only with manual revision B.