6790 RTU Manual

Often, standard packages do not offer an adequate solution for your needs. At ABB, we develop systems that are designed by our customers, fully integrated, customizable, HMI capable, scalable, turn-key, with custom fused I/O, and can be supplied on your time line.

Through our implemenation of the isagraf IEC-61131 industry standard you can now measure, control and automate all in one.

Therms Setup for G4 XSeries Flow Computer and RTU

COMMANDER SR250 Modbus RTU Communications Option

COMMANDER 310 Modbus RTU Communications Option

COMMANDER 200 Modbus RTU Communications Option

COMMANDER 300 Modbus RTU Communications Option

Peyto Exploration and Development in Alberta, Canada has experienced significant savings and natural gas production efficiencies by standardizing well pad designs.

User Guide Modbus (RTU) Communications Option

User Guide

User Guide

XRC G4 Adapting K-TEK for Modbus RS485/COM2 on a 12V System (rev.AA)

This EZ Blocks (2104003-004) version is intended to be used with PCCU 7x or newer software. Do not attempt to use with an older version of (PCCU 6.x or older) of PCCU. Double click the .exe file and the contents will be extracted to a temporary directory c:\temp\EZ Blocks and then run setup.exe to install.

Power Supply, IPS

XSeries Level Two Training Course Description 2023

XRC G4 ( 2103329) AI to ABB TTH300/V10188 TemperatureTransmitter on a 12V system (rev.AA)

XRC G4 (2103329) to K-TEK MT5000 (4-20ma) using AI Module on a 12V System (rev.AA)

XRC G4 ( 2103329 BD) to ABB Vortex and Swirl

Perform differential pressure (dp) calibration on a Totalflow Flow Computer Unit, using portable calibration and collection unit software (PCCU).

AIU/RTU RS-232 wiring to AAI's Btu8000, Danalyzer Model 22551 and AAI's EMS12A Analyzer

Model 7100 LevelMaster to FCU / RTU (RS485 / RS422)

Johnson RNET ( 9600S ) with Modem to RTU

6313 POC sensor and pump control wiring to RTU 6690/6790

Operating Instructions - MODBUS (RTU) Communications Option

MAG-Pickup Amp FCU/RTU

Freewave Radio to UC12 (FCU/RTU)

What if the communications link fails between the LevelMaster and the RTU or the power is lost to the flow computer or RTU? A High Level Switch Assembly can be used as a redundant safety shutdown control mechanism.

External Battery to FCU/AIU/RTU

Operating Guide - MODBUS (RTU) Communications Option

SCI charger regulator in FCU/RTU

LevelMaster PTR switch to FCU/RTU

The WellTell-IS client is an intrinsically safe barrier with integrated wireless capabilities and on-board battery charger.  The device communicates with the WellTell-X host at an RTU or flow computer to eliminate wired connections at the well-site.

The Totalflow Voice Alarm System (VAS) is a Microsoft Windows based program designed to call specified meter technicians, producers, etc., in the event of an alarm condition detected on any Totalflow FCU, RTU or AIU. A person with a valid access code can call into the system and request the current information from any Totalflow FCU or RTU assigned to his or her access code. With the appropriate rights, the caller can send commands to the device directly from the phone.

Radio (Metricom spread spectrum w/modem) RS-232 to FCU (6713, 6714, 66XX) RTU (6680, 6790) O.E.U. (6670, 6671, 6470, 6770)

The WellTell-IO client is a quick and easy way of connecting remote I/O signals to an RTU or Flow Computer.  It looks just like a wire to Totalflow systems – but without the cabling, trenching, environmental impact, and other headaches associated with wireline.  And by eliminating the lightning path, you can prevent damage to connected equipment.

Johnson Radio with modem (4016 / 4046 / 4096) to FCU/RTU

Datel Modem to Term PCBA (RTU)

WebCCU is a software package that acquires data from WinCCU databases and displays it in a web browser to authorized users. WebCCU provides data across a corporate network to users within an organization or, if desired, the information can be provided over the Internet. Information can come from the long-term database, from current information, or from trend files stored at the RTU or Flow Computer.

Data Sheet